The tricuspid valve is a vital circulatory gateway that controls the one-way passage of oxygen-depleted blood returning from the body between the right chambers of the heart. Its primary function is to allow blood to flow easily from the upper right chamber into the lower chamber and prevent it from leaking backward when the heart contracts.
The anatomy of the tricuspid valve consists of a flexible outer framework that moves in harmony with the muscle tissue, soft leaflets that open and close, and thin connective fibers supporting this structure from below.
This dynamic architecture, characterized by a high degree of mobility, directly contributes to the balanced, rhythmic, and coordinated functioning of the low-pressure right heart circulation with every heartbeat.
Functional disorders that may develop over time in the structural integrity of the valve can now be treated comfortably using modern interventional cardiology methods performed through the blood vessels without opening the chest.
Where Is the Tricuspid Valve Located in the Heart and What Is Its Function?
The heart can be imagined as a two-part pumping system that continuously meets the body’s oxygen and nutritional requirements day and night. While the left side of this system sends oxygenated blood from the lungs to the organs, the right side collects blood that has been used by the tissues and has a reduced oxygen content, then delivers it to the lungs to be oxygenated again. The major veins coming from the upper and lower parts of the body first empty this blood into the upper right chamber of the heart, known as the right atrium. For the blood to be pumped from there to the lungs, it must pass into the lower right chamber, also called the right ventricle. The tricuspid valve is a protective barrier located precisely at the junction of these two chambers, coordinating the movement of blood in the correct direction.
In previous years, this valve on the right side was often overlooked in medicine because the valves on the left side of the heart operate under higher pressure and produce more pronounced symptoms when they malfunction. It is even known to have been referred to as the forgotten valve in medical literature for a long period. However, comprehensive clinical observations conducted in recent years have clearly demonstrated how important the right side of the heart and this valve are in their own right. Compared with its counterpart on the left side of the heart, the mitral valve, the tricuspid valve has a wider passage area and a highly flexible structure, facilitating the quiet and balanced continuation of low-pressure right heart circulation. By maintaining the pressure balance of the right heart, it protects the venous system against pressure waves that could travel backward.
The main anatomical structures involved in right heart circulation and directly associated with this valve are:
- Right atrial chamber
- Right ventricular cavity
- Superior vena cava
- Inferior vena cava
- Pulmonary artery
- Coronary sinus opening
How Does the Tricuspid Valve Direct Blood Flow in Daily Life?
Throughout the day, whether walking, resting, or sleeping, the heart contracts and relaxes according to a particular rhythm. The tricuspid valve performs a different mechanical function during each of the two phases of this cycle. When the heart muscle enters its relaxation phase, pressure inside the right ventricle decreases and the chamber begins to expand. At that moment, the valve leaflets gently open downward into the ventricle under the weight of the blood waiting in the right atrium. Thanks to the wide valve opening, blood flows calmly from the upper chamber into the lower chamber, almost like a peaceful river encountering virtually no significant resistance, and the ventricle fills with blood in preparation for the next heartbeat.
When ventricular filling is complete and the contraction phase begins, the pressure inside rises rapidly. As the right ventricle pushes the blood it contains toward the pulmonary artery, the leaflets of the tricuspid valve also move upward under this pressure, meeting edge to edge and resting against each other. This joining of the leaflets is called coaptation in medical terminology. When the valve closes, blood is prevented from returning to the right atrium, where it came from, leaving the pulmonary artery as the only open pathway available. Through this coordinated opening and closing, repeated many times within seconds, sufficient blood is delivered to the lungs while congestion of blood returning to the heart from organs such as the liver and kidneys is prevented in the veins.
The main physiological stages involved in maintaining healthy blood flow are:
- Free opening of the leaflets during the relaxation phase
- Filling of the right ventricle with blood at low resistance
- Meeting of the valve leaflet edges at the beginning of contraction
- Prevention of backward leakage toward the right atrium
- Direction of blood toward the pulmonary artery
What Are the Main Structural Components of Tricuspid Valve Anatomy?
Although it may appear from the outside to be a simple door that opens and closes, the tricuspid valve is actually a three-dimensional system made up of numerous mechanically interconnected components. Comparing this system to a parachute makes it much easier to understand. The fabric of the parachute is represented by the thin, flexible valve leaflets that move in response to blood pressure. These leaflets attach to a flexible ring called the annulus, which forms the outer framework of the valve. The valve annulus is located at the boundary where the atrial and ventricular muscles meet, providing support to the leaflets while also participating in movement by changing shape with every contraction of the heart.
Like the cords holding the fabric of a parachute from below, thin but highly durable connective tissue fibers extend downward from the free edges and undersurfaces of the valve leaflets. These fibers, called chordae tendineae, attach to small muscular columns known as papillary muscles that project from the inner wall of the right ventricle. When the heart contracts, the strong pressure generated by the blood attempts to turn the leaflets backward toward the right atrium. At this moment, the muscular columns within the ventricle and the fibers attached to them come into action, holding the leaflets securely and evenly from below. The inner surface of the right ventricle has an intricate network of muscular ridges and recesses, together with a rich arrangement of fibers. In interventional cardiology, detailed knowledge of these underlying structures and the use of advanced imaging methods during the procedure are extremely important for guiding catheters advanced from the groin without becoming entangled in this dense network of fibers.
The main structural components forming the tricuspid valve complex are:
- Flexible valve annulus
- Mobile valve leaflets
- Connective tissue fibers
- Ventricular papillary muscles
- Right atrial wall tissue
- Right ventricular muscular network
Why Do Tricuspid Valve Leaflets Vary From Person to Person?
The term tricuspid originally means three-pointed, and classical anatomical descriptions explain that this valve consists of three separate leaflets: anterior, posterior, and septal. The anterior leaflet generally has the largest surface area and the greatest mobility. The septal leaflet, located on the inner side, attaches directly to the central septum separating the right and left sides of the heart and has more restricted movement compared with the others. The posterior leaflet lies closer to the lower wall and exhibits a more variable structure with natural indentations along its edges. When these three leaflets close, they form a closure line in the center resembling a three-armed star.
However, with the development of three-dimensional imaging technologies, it has become clear that the number and shape of these leaflets in humans can vary as much as fingerprints. Although the classical three-leaflet structure is present in a substantial proportion of the population, some individuals have a two-leaflet appearance because the anterior and posterior leaflets are congenitally fused. Another fairly common variation involves additional independent segments between the main leaflets, giving the valve a four-leaflet or sometimes even a five-leaflet morphology. An increased number of leaflets may cause blood to leak through multiple points between the leaflets during closure and may make the closure gap irregular. When planning an interventional procedure, determining the number of leaflets beforehand directly influences the angle at which clips or valve devices introduced through the groin will be applied and how many devices will be required.
The main anatomical variations in leaflet morphology include:
- Classical three-leaflet arrangement
- Congenitally fused two-leaflet structure
- Four-leaflet form with additional segments
- Complex appearance with more than four segments
- Posterior leaflet variation with multiple indentations
Why Are the Tricuspid Valve Framework and Adjacent Tissues Delicate Structures?
While the valves on the left side of the heart are seated within a firm and durable ring of connective tissue, the tricuspid valve framework has a much softer, predominantly muscular, and flexible structure. Furthermore, this framework does not lie like a flat ring placed on a table; it exhibits a three-dimensional, dynamic geometry that curves into a saddle shape throughout the cardiac contraction cycle. The portion of the framework facing the internal septum of the heart is resistant to expansion because it rests on firmer tissue. However, the anterior and posterior portions adjacent to the outer free wall of the right ventricle lie directly on muscle tissue. Because of this asymmetric structure, when pressure or fluid load increases in the right heart, the valve framework expands by stretching outward and backward, loses its saddle shape, and becomes flatter and more circular.
Immediately surrounding this flexible valve framework are two vital neighboring structures that must be carefully protected during interventional procedures. The first is the heart’s main electrical center and conduction pathways, located near the attachment of the septal leaflet in an area known as the triangle of Koch. Excessive pressure or suturing involving these electrical pathways, which transmit heartbeats from the atrium to the ventricle, may slow the heart rhythm and create a need for a permanent pacemaker. The second important neighboring structure is the right coronary artery, which runs only a few millimeters from the outer portion of the valve framework. This major artery supplying the heart muscle is closely monitored, particularly during procedures intended to narrow the valve annulus, and its patency is continuously checked with angiography throughout the intervention.
The delicate anatomical structures immediately adjacent to the valve framework include:
- Atrioventricular electrical node
- His bundle of electrical conduction
- Right coronary artery
- Coronary sinus venous opening
- Tendon of Todaro
- Membranous interventricular septum
What Causes Tricuspid Valve Regurgitation?
Tricuspid valve regurgitation, also called valve leakage, occurs when the edges of the valve leaflets cannot meet as the right ventricle contracts, allowing blood to flow backward into the right atrium instead of traveling to the lungs. According to its mechanism of development, this condition is mainly examined in two different groups. The first is primary regurgitation, which accounts for a smaller proportion of patients and results from direct damage to the valve tissue itself. Previous valve infections, rheumatic involvement, congenital leaflet abnormalities, or certain systemic diseases can cause the leaflet tissue to shrink and deteriorate. In addition, the leads of pacemakers or defibrillators placed in the right heart to regulate heart rhythm may press against a leaflet while passing through the tricuspid valve, adhere to it, and physically prevent the valve from closing.
The second condition, observed in the vast majority of patients, is secondary, or functional, regurgitation. Here, the valve leaflets and chordae are structurally intact, but enlargement of the heart chambers surrounding the valve has distorted its geometry. This condition can develop in two ways. Particularly in older individuals and those with long-standing rhythm disorders such as atrial fibrillation, the right atrium gradually enlarges, causing the valve annulus to stretch outward. Although the leaflets remain intact, their edges cannot reach one another because the framework has become excessively enlarged. In the other mechanism, the right ventricle expands and takes on a spherical shape due to left heart diseases or pulmonary hypertension. As the ventricle enlarges, the muscular columns inside it are pulled downward and sideways, tightening the parachute-like cords, drawing the leaflets into the ventricle, and disrupting the level at which the valve closes.
The main clinical conditions that predispose patients to valve regurgitation include:
- Chronic atrial fibrillation
- Left-sided heart valve diseases
- Weak contraction of the left ventricle
- Elevated pulmonary artery pressure
- Pacemaker and defibrillator leads
- History of infective endocarditis
- Congenital abnormalities such as Ebstein anomaly
What Symptoms and Organ Problems Does Tricuspid Valve Leakage Cause in the Body?
When tricuspid valve leakage is mild or moderate, the right heart may tolerate the condition silently for a long time because it operates at low pressure, and the person may not experience noticeable discomfort in daily life. However, when the leakage becomes severe, a significant amount of blood is forced backward with every heartbeat into the right atrium and from there into the superior and inferior vena cava, which return blood to the heart, instead of traveling to the lungs. Because the amount of oxygenated blood delivered to the lungs and consequently to the body decreases, patients initially begin to tire quickly, feel weak, and experience shortness of breath during exertion while walking or doing household chores they previously performed comfortably. Over time, the right ventricle also enlarges and becomes fatigued as it attempts to accommodate this continuously regurgitating blood volume.
The most pronounced effects of this backward pressure wave are seen in organs located upstream in the venous system, particularly the liver and kidneys. The liver, situated immediately below the heart, cannot drain its blood easily into the heart because of the elevated pressure in the vena cava, and blood begins to accumulate within it. Prolonged congestion causes liver enlargement, a feeling of fullness beneath the right ribs, and eventually deterioration of liver function. Similarly, increased venous pressure reduces the kidneys’ filtration pressure, urine output decreases, and the response to diuretic medications becomes weaker. Fluid trapped within the blood vessels leaks into the spaces between tissues, causing substantial edema in the ankles, legs, and abdominal cavity. As the intestinal walls also become swollen, digestive complaints such as early satiety, loss of appetite, and weight loss are added to the clinical picture.
Common symptoms observed in patients with advanced valve regurgitation include:
- Pronounced swelling of the ankles and legs
- Fluid accumulation and bloating in the abdominal cavity
- Early fatigue during daily activities
- Shortness of breath that increases during exertion
- Loss of appetite and indigestion after meals
- Visible distension of the neck veins
- Tenderness in the upper right abdomen
- Reduced urine output
How Does the Diagnosis and Anatomical Mapping Process Work in Tricuspid Valve Diseases?
When tricuspid valve regurgitation is suspected in a patient, particularly when interventional repair or replacement is being considered, the anatomical structure of the valve must be mapped in detail. The first step in diagnosis is standard echocardiography performed through the chest wall. This examination provides valuable information about the presence of leakage, the dimensions of the right atrium and right ventricle, the extent of valve annular enlargement, and pulmonary artery pressure. However, because the right heart is located immediately behind the breastbone and has a complex three-dimensional structure, it may not always be possible to visualize every fine detail of the leaflets using surface ultrasound alone.
In interventional cardiology, the stage that directly determines procedural success is three-dimensional transesophageal echocardiography performed through the esophagus. This method provides a three-dimensional view of the valve from directly opposite it, almost as though looking straight at it. The number of leaflets, the width of the gap between them during closure in millimeters, how far the leaflets are pulled into the ventricle, and the exact location from which the regurgitant flow originates are measured in detail. If valve annular reduction or implantation of a new valve through the groin is planned, multislice cardiac computed tomography is used. This imaging makes it possible to model the three-dimensional circumference of the valve annulus, the distance in millimeters between the right coronary artery and the annulus, and the width and angulation of the venous pathway extending from the groin to the heart. When necessary, cardiac magnetic resonance imaging is also used to assess the actual contractile strength of the right ventricle and the condition of its muscle tissue, allowing the most appropriate method to be selected for the patient.
The main diagnostic and imaging tools used when planning interventional treatment include:
- Transthoracic echocardiography performed through the chest wall
- Three-dimensional transesophageal echocardiography
- Contrast-enhanced multislice cardiac computed tomography
- Cardiac magnetic resonance imaging
- Right heart catheterization and pressure measurement
- Simultaneous coronary angiography examination
Why Are Interventional Methods Considered Instead of Open Surgery for Tricuspid Valve Problems?
In patients with severe tricuspid valve regurgitation whose symptoms persist despite medication and diuretic treatment, the leakage needs to be corrected mechanically. For many years, the only way to accomplish this was conventional open-heart surgery involving opening the breastbone. However, open surgical procedures performed solely on the tricuspid valve have historically carried higher perioperative risks compared with other heart operations. The main reason is that these patients are generally elderly, a substantial proportion have already undergone open-heart surgery for left-sided heart valves years earlier, and their liver and kidney reserves have been weakened by prolonged venous congestion.
In patients whose chest has previously been opened, adhesions between tissues make a second open operation more difficult, while connecting the patient to a heart-lung machine and temporarily stopping the heart places a serious burden on the already exhausted right ventricle and kidneys. For these reasons, many patients considered to have high surgical risk were previously classified as inoperable and had to be monitored with medical treatment alone. Today, however, transcatheter methods offered by interventional cardiology, performed through vascular access from the groin, have significantly changed this situation. These procedures, performed through the femoral vein without cutting the chest, using a heart-lung machine, or interrupting the heart’s normal beating, allow the valve to be repaired or replaced without causing major surgical trauma to the body. Furthermore, with sutureless edge-to-edge repair techniques, the likelihood of damaging the heart’s electrical system is considerably lower than with open surgery.
The main patient groups in whom interventional treatments are particularly favored over open surgery include:
- Elderly patients with frailty and poor general condition
- Individuals who have previously undergone open-heart surgery
- Patients with reduced kidney filtration function
- Patients with liver congestion and impaired liver function
- Individuals with high calculated surgical risk
- Patients with borderline left heart function
How Are Nonsurgical Clipping and Annular Reduction Performed in Tricuspid Valve Repair?
The most commonly used method for repairing the tricuspid valve in interventional cardiology is the clipping technique, known as transcatheter edge-to-edge valve repair. Through a small access point in the femoral vein, the right atrium is reached using special catheters that can be directed according to the anatomical curves of the right heart. Throughout the procedure, three-dimensional ultrasound imaging through the esophagus and fluoroscopic imaging are used for guidance. The device, which has a small clip at its tip, is aligned with the area of the valve responsible for the greatest leakage. The free edges of the opening and closing leaflets are captured between the arms of this clip and brought closer together. As a result, the wide valve opening that previously could not close takes on a more controlled configuration, allowing blood to pass freely along the sides while largely preventing backward leakage.
Advanced systems such as TriClip and PASCAL, currently used for this procedure, have features designed to meet different anatomical requirements. In some systems, a soft, silicone-like spacer is located at the exact center of the clip; while filling the gap between the leaflets, this component also reduces the pulling tension on the tissues. In addition, the ability to grasp the leaflets independently, one at a time, allows even widely separated or asymmetrically positioned leaflets to be securely captured. In patients whose problem is caused by enlargement of the valve annulus rather than leaflet tethering, annular reduction systems introduced through the groin, such as Cardioband, may be preferred. With this method, small anchoring elements are placed along the muscular outer wall of the valve framework, after which the band is tightened in a controlled manner to reduce the enlarged valve annulus. During the procedure, the right coronary artery is continuously visualized to protect vessel safety.
The main techniques and approaches used in transcatheter valve repair include:
- Mechanical clips that join the leaflet edges
- Systems containing a central gap-filling spacer
- Independent arms capable of grasping leaflets individually
- Strategies for closing large leaks with multiple clips
- Annular reduction bands introduced through the groin
Who Is Suitable for Tricuspid Valve Replacement and Vena Cava Valve Systems?
In some patients, the closure gap between the valve leaflets is too wide for clipping devices to reach, or the leaflets have been severely pulled down into the right ventricle. Sometimes, complex anatomy involving four or more leaflets or significant tissue irregularities caused by pacemaker leads can also reduce the chances of successful repair. In such situations, transcatheter tricuspid valve replacement, meaning valve replacement without open surgery through the groin, becomes an option. Bioprosthetic valves such as Evoque or LuX-Valve, which have a self-expanding nitinol framework, are advanced through a catheter and implanted directly into the patient’s native valve annulus. When this new valve opens, it replaces the function of the old valve and eliminates backward blood leakage to a very high degree. However, before the procedure, physicians carefully assess whether the right ventricle, which has become accustomed to allowing blood to leak into the low-resistance atrium for years, has sufficient contractile strength to pump all the blood toward the lungs once the leakage is eliminated.
In advanced-stage patients whose right ventricular function has become extremely weak, whose pulmonary artery pressure is elevated, or whose anatomy is considered unsuitable for either repair or direct valve replacement, a different interventional approach called caval valve implantation may be used. In this procedure, performed with systems such as TricValve, the tricuspid valve itself is not touched. Instead, a bioprosthetic valve is placed through the groin at each of the points where the superior and inferior vena cava, which return blood to the right atrium, join the heart. This procedure, which can be completed in as little as approximately thirty minutes, acts like a breakwater, preventing blood leaking into the right atrium from surging backward toward the liver, kidneys, and leg veins. This rapidly reduces venous pressure on the liver and kidneys, providing noticeable relief from symptoms that diminish the patient’s quality of life, such as edema and abdominal swelling.
Interventional solutions used in advanced cases unsuitable for repair include:
- Orthotopic bioprosthetic valve implantation through the groin
- Valves with self-expanding nitinol frameworks
- Superior vena cava valve implantation
- Inferior vena cava valve implantation
- Preprocedural assessment of right ventricular reserve
What Should Recovery and Lifestyle Be Like After Tricuspid Valve Treatment?
One of the most reassuring aspects of tricuspid valve procedures performed using interventional cardiology methods is that recovery after the procedure is considerably more comfortable and shorter than after open surgery. Because the breastbone is not cut and there is no sutured surgical wound, patients do not have to undergo a bone-healing process lasting several weeks. Most patients are transferred to their ward rooms shortly after the procedure, begin walking the next day, and are generally discharged home within two or three days. They can also readjust to their daily social lives within a few weeks. As valve leakage is reduced or venous pressure is lowered, blood supply to the kidneys improves, excess fluid accumulated in the body is more easily eliminated through urine, and the patient’s complaints of shortness of breath and swelling gradually diminish day by day.
Nevertheless, to preserve the benefits achieved by the transcatheter procedure for many years, patients must continue working closely with their physicians after treatment. The intervention does not mean that diuretics or medications regulating heart rhythm can be stopped entirely; rather, medication dosages are readjusted according to the new condition. Regular use of blood-thinning medications for the period determined by the physician is important to prevent clot formation on the implanted devices. In addition, limiting salt intake to prevent the body from retaining water again, maintaining balanced daily fluid consumption, and monitoring body weight regularly in the morning on an empty stomach to detect possible fluid accumulation early all support recovery. Echocardiographic follow-up examinations at regular intervals and gentle walks appropriate to the patient’s physical capacity help preserve the improvement in quality of life over the long term.
Lifestyle recommendations that support heart health after interventional treatment include:
- Limiting daily salt consumption
- Following the fluid intake balance recommended by the physician
- Taking blood-thinning medications and diuretics regularly
- Monitoring body weight regularly in the morning
- Continuing gradual walking exercises without excessive exertion
- Consulting the physician before procedures such as tooth extraction
- Attending scheduled echocardiography follow-up examinations

Prof. Dr. Kadriye Orta Kılıçkesmez is one of the leading figures in the field of Turkish cardiology. She was born on January 24, 1974, in Tekirdağ. After completing her undergraduate education at Istanbul University Cerrahpaşa Faculty of Medicine, she chose cardiology as her specialty and received her specialist training at the Cardiology Institute of the same university. In 2015, she was appointed by the university to establish the Şişli Etfal cardiology clinic and Angio laboratory. Becoming a professor in 2017, Kadriye Kılıçkesmez established the cardiology clinic and Angio laboratory of Prof. Dr. Cemil Taşçı Hospital in 2020 and ensured that the clinic became a training clinic.
